直播&手機|相機及附件|拍攝工具|影棚設備|聲音相關|品牌專館|特賣活動
JOOPIC CamBuddy二代 (黑) 7合1 DSLR手機遙控拍攝套組

JOOPIC CamBuddy二代 (黑) 7合1 DSLR手機遙控拍攝套組

產品編號:AJB004

全能智慧型相機遙控神器!7合1的多功能設計,一對多機操控相機,無線快門距離可達30米,即時調整參數且支援同步取景、定時快門、聲光電觸發不漏拍,無線傳輸立即分享。NCC號碼:CCAJ18LP0290T0

對商品有任何問題嗎?
  • 客服電話:(02)87683842 / 客服信箱:mail@kphoto.com.tw
  • 服務時間:週一至週五09:00-18:00
會員價:NT 2690
購物金 回饋134元
數量:

 

全能智慧型相機遙控神器!

 

7合1的多功能設計,一對多機操控相機,距離可達30米,即時調整參數且支援同步取景、定時快門、聲光電觸發不漏拍,無線WIFI傳輸立即分享

 

JOOPIC韌體更新教學及實測精彩內容請點選上方延伸應用

(NCC號碼:CCAJ18LP0290T0,本產品快門線另購,不含相機及手機)

 

 

 

Joopic主機 x1

收納袋 x1

矽膠保護套 x1

固定用綁帶 x1

充電線(無數據傳輸功能) x1

 

注意:
本產品不包含快門線與相機連機用的連接線,需搭配相機內附的USB數據線,或依相機規格自行購買適合的USB線及快門線。

 

項目 規格 項目 規格
機型 通用 觸發距離 30 米
頻道 其他 同步速度 其他

商品本體

    能想像一個小盒子,能讓你的DSLR用手機遙控拍攝、即時監看、圖片傳送,甚至還可以「縮時攝影」、「雷射阻斷拍攝」、「聲音感應拍照」嗎?

     

    這是哪來的外星科技呀~

     

    什麼?Joopic居然自稱開發出這種神器?我們就讓身為楔石最~資深解說員的龍哥來測試看看吧!是不是有那麼神?

     

     

    原來Joopic開發出的這款控制器叫做CamBuddy,直翻中文就是DSLR的伴侶的意思啦。

     

    盒子打開東西還不少~有Joopic本體、充電線、收納袋、防水套、束線帶、工具起子...

     

    咦?相機的快門連接線呢?相機的USB資料傳輸線呢?

     

     

    立刻打電話詢問原廠,原來USB相機連接線在買DSLR時本身有附了。(有的是USB2.0有的是3.0的)

     

    快門連接線因為每種機型的快門線不同,所以採另外選購的方式...

     

    那怎麼接呢?首先將DSLR USB傳輸線連接到USB孔,再將快門連接線接到DSLR的快門線孔,總共要接兩條線功能才會完整喔!

     

    USB連接線 兩條線都要接功能才完整

     

    接下來呢?當然是要在手機安裝控制軟體囉~

     

    iphone手機可以在Apps store下載

     

    Android就在Google Play下載

     

     

    原廠強調有下面那麼多功能!

     

     

    我們就一個一個來試看看吧...

     

    首先開啟App,用wifi連上Joopic非常容易只要簡單的對頻動作就可以了~(介面是繁體中文不是殘體字喔...)

     

    連上相機後果然可以開啟Live View即時監看耶!雖然畫面有輕微延遲,但可遠端監看就是讚啦!

     

    光圈、快門、ISO甚至半按快門對焦,甚至拍完的照片還能傳回iphone呢~

     

     

    拿來拍野生動物也不用面對面...(會用來拍獅子嗎?)

     

     

    這還只是基本的功能,Joopic最強的就是還可以「自動」幫你拍!

     

    只要切換到「定時拍攝」功能,就可以自動拍攝「縮時攝影」的照片了,也可以用來做科學紀錄用(手機還有Jooplay要有電呀...)。

     

     

    Joopic還有「聲音觸發」功能,如果環境突然有聲響就會自動觸發拍攝~

     

     

    我們拍攝氣球爆破的瞬間,效果很不錯!

    (裡面用的是麵粉~)

     

    靈敏度、時間延遲的設定要做微調,才能達到最好的效果。

     

    準備器材:

    • Joopic
    • 單眼相機
    • 三腳架
    • 高速閃燈(在此是使用FOMEX G600
    • 閃燈觸發器 (在此使用FLASH WAVE III
    • 快門線(使用B快門)
    • 氣球數個(這次拍攝總共用掉了快40個,這是偷拿家中小朋友的,但最後仍被發現XD)
    • 粉末(什麼粉都可,或裝水)主要用來營造爆炸時所產生感覺
    • 深色背景(此次使用五用反光板中的黑色部分)
    • 背景燈(為了讓爆炸的粉末更明顯)(此次使用LED燈
    • 吸塵器(用來處理爆炸的粉末)

     

     

    當選購「JOOPIC激光器套裝」,就可以利用雷射當作觸發陷阱,即時拍攝瞬間的畫面。

     

     

     

    我們利用紅外線阻斷拍攝東西落水的瞬間。

     

    靈敏度、時間延遲的設定要做微調,才能達到最好的效果。

     

    準備器材:

     

    甚至,它還能拍攝閃電觸發的瞬間!不過現在冬天沒有打雷我們沒辦法實測...  我們就看原廠的示範圖片吧~

     

     

    那...如果不是用手機,筆電也能連嗎?當然這也難不了它,甚至無論PC、MAC或是Linux的主機都可以連!

    下載網址

     

     

    這下連專業的攝影棚都可以即時回傳攝影師拍攝的照片了,讓客戶都能即時監看拍攝的結果。

     

    測試結果:~然~很~神~

     

    Joopic目前大多數的Canon、Nikon單眼相機都能支援(Sony表示...),如果有興趣歡迎來楔石門市玩玩看喔!

     

    --楔石 龍哥 (楔石一哥自稱)

     

     

    韌體升級教學

    升級韌體前請注意

    1. 打開JOOPIC電源開關,等待JOOPIC進入黃燈閃爍狀態。若JOOPIC進入藍燈常亮狀態,輕戳JOOPIC後方復位,讓JOOPIC進入藍牙狀態。
       
    2. 打開玖拍應用,進入相機頁面,點擊右上角發現,選擇JOOPIC加強版。並與處於藍牙狀態的JOOPIC進行配對。
       
    3. 連接JOOPIC後,恢復網絡連接後,系統會自動下載最新韌體,可在“我” - >“設置”頁面內查看最新韌體下載情況。
       
    4. 下載最新韌體完畢後,進入JOOPIC設置頁面,點擊頁面下方更新韌體,進入韌體升級頁面。
       
    5. 升級前請將JOOPIC接入電源,並根據提示完成升級流程。
       
    6. 升級完畢後,JOOPIC會進入藍燈常亮狀態。若超過5分鐘仍未進入藍燈常亮狀態,如JOOPIC前置指示燈中間的指示燈停止閃爍,藍燈常亮,也代表升級完成。
       
    7. 升級韌體成功後,長戳Reset 5秒以上,將重置JOOPIC,重置後,JOOPIC重新啟動將自動進入藍牙狀態。完成升級流程。

     

    • Please update Joopic App to the latest version.

    app version

    • Please make sure that your phone is connected to the Internet.
      • Start the App, for users who have already connected and used the CamBuddy before, it will automatically detect and download the latest firmware.
      • You can view the version information by following the steps: "Me" --> "Settings" --> "Latest CamBuddy Firmware",as shown in this picture:

    firmware download ok

    • Switch off CamBuddy Pro and charge it by two hours.

    Steps for upgrading

    • Picture 1: Open Joopic App, if your firmware is not the latest firmware you will get this pop-up message or if there is no pop-up message you can press the settings button at the right upper corner.

    • Picture 2: At the settings interface press the “Upgrade Firmware” button to proceed.

    1,2

    • Picture 3: Tap the “Upgrade” button at the upper right corner
    • Picture 4: A pop-up message will appear as a reminder. Press “OK” to continue.

    Camera Control interface

    • Picture 5: Attentions interface will appear; you can press “Upgrade” to continue.
    • Picture 6: Press “OK” if you have understood the firmware upgrade rules.

    Camera Control interface

    • Picture 7 & 8: The firmware upgrade has start, wait for 5 minutes without disconnecting.

    Cambuddy Pro set

    • Picture 9: Once your CamBuddy Pro front indicator is in steady blue state, tap the “Done” button as shown in the picture.

    Cambuddy Pro upgrade

    Reset MCU

    After upgrading the firmware, you can reset MCU to recover the failed smart triggerring functions.

    Please note this before Resetting the MCU

    • Please update Joopic App to the latest version.
    • Resetting the MCU will be done via Bluetooth so please turn on your phone’s Bluetooth.
    • Switch off your CamBuddy Pro and charge it by two hours.

    Steps to reset MCU

    • 1 . Turn on the CamBuddy and connect it to the Joopic App, as shown in this picture:

    Camera Page

    • 2 . Enter the CamBuddy Pro Control interface, as shown in this picture:

    Camera Control interface

    • 3 . Enter the CamBuddy Pro "Set" interface by click set button, as show in this picture:

    Camera Control interface

    • 4 . Please try to find the RESET button on the setting page of your CamBuddy Proe
      • If there is no such a button, you do not need to reset your MCU, as show in this picture:

    Camera Control interface

    • If there is a Reset button, you need to reset your MCU, as show in this picture:

    Camera Control interface

    • 5 . Click "Reset" Button ->"Attentions" interface, as show in thie picture:

    Camera Control interface

    • 6 . Click "Upgrade" Button, a warning window will pop up, click "Confim" will start the reset MCU operation, as shown in this picture:

    Camera Control interface

    • 7 . The reset MCU will be done automatically, it will take about 2 minutes. During the MCU reset, do not close the CamBuddy or disconnect it from the external power supply.

    Camera Control interface

    • 8 . After reset MCU is successfully done, the following interface will be displayed, now you can reconnect the CamBuddy Wi-Fi hotspot to use your CamBuddy Pro!

    Camera Control interface

    • 9 . Sometimes reset MCU may fail, it is because Bluetooth is vulnerable to interference. At this point, you can turn off CamBuddy after a minute and try again, or reopen the Bluetooth on your phone, try again.

    Camera Control interface

    If you tried and failed to reset MCU over and over, please take the result page as a screenshot and send it to us at support@joobot.com. We will confirm this situation and replace your CamBuddy Pro.

     

    推薦商品

     

     

     

    關於楔石

    購物指南

    相關網站

    楔石社群

      最新消息 購物流程指南 Pinkoi
      服務團隊 KeyPoint購物金 蝦皮購物
      交通資訊 運送須知 Skier官網
      與楔石合作 退/換貨及退款 Peak Design台灣官網

     

    隨時掌握最新資訊
      企業禮贈品大量採購 商品保固須知  
      網站使用條款    
      隱私權政策    
      免責聲明    

     

     


    110 台北市信義區東興路37號5樓 產品諮詢專線: 02-87681238 傳真: 02-87683260
    門市營業時間:週一至週五 09:00-18:00 E-mail:mail@kphoto.com.tw
    網購訂單客服時間:週一至週五 09:00-18:00 服務專線: 02-87683842
    營業人名稱:楔石企業有限公司 統一編號:89619548

    嚴防詐騙|本公司不會透過任何名義要求核對購物資訊、銀行帳戶或信用卡等個人資訊,如接到請立即掛斷或撥打165防詐騙專線
    最佳瀏覽器:IE9以上版本、Firefox、Chrome
    Copyright © 2015 楔石企業有限公司. All rights reserved. 版權所有,禁止擅自轉貼節錄